11
Bassinet Base Assembly - continued
6
Continue to Step 7...
IMPORTANT: Height of Support
Tubes must be adjusted evenly. Do
Not elevate one side higher than
the other.
02503
- Support
Tube
(x1)
E
Note: When both Support Tubes (E)
are in place, you may adjust the height
by pushing in on the snap buttons and
lifting up or down.
D
E
Parts Needed:
Insert Support Tube (E) into Rocker Legs
(D). Push in on the snap button. Then
slide the Support Tube down until the
snap button locks into place.
BASSINET BASE ASSEMBLY
18
BASSINET BASKET ASSEMBLY
Bassinet Basket Assembly - continued
14
Continue to Step 15...
Parts Needed:
Slip the Sheet (R) over the Mattress Pad (Q).
Then Assemble it into the bottom of the
Bassinet Assembly (
see Figure 1
).
Note: On some models sheet will already
be attached to mattress pad.
00095
- Mattress
Pad
(x1)
Q
00560
- Sheet
(x1)
R
Figure 1
R
Q
