Delta Children Jeep SPORT UTILITY, Инструкция по эксплуатации

Страница: 11 / 17

11
12
Press Both Side
Buttons And Lift
To Fully Remove
Seat
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front Back
Insert On
Both Sides
Fig. 12A
Fig. 12B
Fig. 12C
Fig. 12D:
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
Attaching Chicco Car Seats - Keyfit 30™:
Lock the rear wheels (Fig.12). Remove seat (Fig. 12A). Attach the car seat
adapter to the stroller frame (Fig. 12B) until it clicks into a fully locked
position (Fig. 12C). Place car seat into car seat adapter until it “CLICKS”
into a fully locked position. Chicco car seats “CLICK” and lock on both
sides of the adapter when in a fully locked position (Fig. 12D). Make sure
car seat is fully fastened by pulling upward.
®
Fig. 12
Push downward on brake
lever to lock stroller
Lock The Rear Wheels:
Attaching Car Seat Adapter:
Securing Car Seat With Velcro Straps:
Remove Seat:
Attaching Chicco Car Seats
®
Chicco Keyfit 30™
®
Fig. 12E
Chicco Car Seat Side Locking Tabs
Lock Under This Area On The Adapter
Locking Tabs
Located On Both
Sides Of Car Seat
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 12E). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Car Seat In A Fully
Locked Position
Car Seat Locking
Tabs Lock On Both
Sides When In A Fully
Locked Position