12
Attaching Graco Car Seats
®
Graco SnugRide® Click Connect™ 30, 35, and 40
®
Car Seat Back Locking Tab Locks
Under The Back Of The Adapter
When In A Fully Locked Position
Car Seat In A Fully
Locked Position
13
Attaching Graco Car Seats- SnugRide® Click Connect™
30, 35
and 40:
Lock the rear wheels (Fig.13). Remove seat (Fig. 13A). Attach the car seat
adapter to the stroller frame (Fig. 13B) until it clicks into a fully locked position
(Fig. 13C). Place car seat into car seat adapter until it “CLICKS” into a fully
locked position. Graco car seats “CLICK” and lock on the back and both sides
of the adapter when in a fully locked position (Fig. 13D). Make sure car seat is
fully fastened by pulling upward.
®
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 13E). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front
Back
Insert On
Both Sides
Fig. 13B
Fig. 13C
Attaching Car Seat Adapter:
Graco Car Seat Side Locking Tabs Lock
Into This Area On The Adapter
Locking Tabs
Located On Both Sides
Of Car Seat
Car Seat Locking Tabs
Lock On Both Sides When
In A Fully Locked Position
Fig. 13D:
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
Press Both Side
Buttons And Lift
To Fully Remove
Seat
Fig. 13A
Fig. 13
Push downward on brake
lever to lock stroller
Lock The Rear Wheels:
Remove Seat:
Fig. 13E
Securing Car Seat With Velcro Straps:
Содержание Jeep SPORT UTILITY
Страница 17: ...17 646 435 8726...
