5
Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
Assembly
4
Attaching Back Wheels To Wheel Axle:
Please follow these instructions for the proper installation
of your rear axle assembly.
• To attach rear wheels: Align back wheel axle to the stroller’s rear wheel
axle housing (Fig.4) Push back wheel axle until you hear a “CLICK”.
Repeat steps for other side back wheel. Once the wheels are securely
attached to the rear wheel axle (Fig. 4A) check to make sure back wheel
is in a fully locked position by pulling outward.
NEVER
use stroller if any wheels are not in a fully locked position. Please
contact our customer server department immediately at 1-800-377-3777 for
assistance.
Fig. 4A
Fig. 4
Fig. 4B
Attaching / Removing Child Bar
To Attach Child Bar:
•
Insert both sides of the child bar into the bottom of the child posts
until child bar “CLICKS” into a fully locked position (Fig. 5).
Repeat on other side.
Note:
Pull upward on the child bar to ensure that the child bar is
securely locked.
To Remove Child Bar:
•
Press tabs inward located on both sides of the child bar and lift
upward until child bar is fully removed (Fig. 5A).
5
Fig. 5
Fig. 5A
BACK WHEELS
• To dettach rear wheels: Press the wheel release button located on the
sides of the wheel axle and pull outward until wheel is released (Fig. 4B).
• Repeat on opposite side.
Fig. 4C
To Lock
Press Downward
Fig. 4D
To Unlock
Push Upward
WARNING: Always set brakes when the stroller is not being
pushed so that the stroller will not roll away. Never leave stroller
unattended on a hill or incline as the stroller may slide down the hill.
Back Wheel Brakes
• To lock brakes: Apply light downward pressure to the linked brake lever
located on the rear wheel axle. (Fig. 4C) Check that the stroller will not
move and that the brakes are properly applied.
• To release brakes: Gently step on top of the linked brake lever and push
downward. (Fig. 4D)
Содержание J is for Jeep Side x Side Destination
Страница 9: ......
