Delta Children J is for Jeep Side x Side Destination, Инструкция по эксплуатации

Страница: 4 / 9

4
Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
Assembly
2
3
Attaching Rear Wheel Axle
Please follow these instructions for the proper installation
of your rear axle assembly.
• To attach rear wheel axle: Attach the rear wheel assembly, line up the
frame tubes with the rear wheel back leg housing with the brake pedal
facing outward of the stroller (Fig. 3). Push both housings onto the rear
frame tubes at the same time until they “CLICK” into a fully locked position
(Fig. 3A). Check that the push buttons show through the small hole near
the bottom of the inside housing (Fig 3B). Make sure the axle is firmly
attached to the stroller by pulling downward on the rear wheel axle.
Attaching Front Swivel Wheels
• Locate the legs on the front of the stroller.
• Attach one front swivel wheel to the stroller frame leg making sure the lock
pedal on the wheel is facing up (Fig. 2). You will hear a “snap” once they
are in a fully locked position. Check to make sure the front swivel wheel is
fully secure by pulling downward.
• Repeat on opposite side.
Front Wheel Swivel Lock
• To lock swivel: Apply light downward pressure on the swivel lever
located on the front of the wheel (Fig. 2).
• To release swivel: Gently lift upward under the swivel lever located
on the front of the wheel (Fig. 2C).
Fig. 2B
To Lock Swivel
Press Downward On Lever
Fig. 2C
To Unlock Swivel
Push Upward Under Lever
Fig. 3
Fig. 3A
ATTACHING FRONT WHEELS
• To dettach wheels: Press the wheel release button located at the bottom
of the wheel housing underneath the swivel lock and pull downward to
release (Fig. 2D).
• Repeat on opposite side.
Fig. 2D
DETTACHING FRONT WHEELS
Lock Swivel Pedal
Fig. 2
Fig. 3B