10
5. Warm the cradle mount adhesive pad by
using a hair dryer or by placing the cra-
dle mount on top of the vehicle’s defrost
outlet for several minutes with the heater
on. Remove the liner from the adhesive
pad and adhere to the vehicle’s surface.
Make sure you accurately place the pad
on the first try since in many cases it
will bond almost immediately. 3M
recommends a 72-hour curing time for
maximum adhesion.
6. Clip the SKYFi Car Cradle onto the car
cradle mount.
You can also mount the SKYFi Car Cradle
directly to your dashboard without using
the car cradle mount by using the enclosed
extra adhesive pad. Follow the prior mount-
ing directions, and make sure you adhere
the correct side of the pad to the car cradle
as labeled.
Figure 8. Attach car cradle mount to back of SKYFi Car
Cradle as shown.
