SKYFi Home Kit Set-up
Your SKYFi™ Home Kit contains the
following components:
Set up your SKYFi Home Kit as follows:
1. Connect the ministereo (black connector)
end of the supplied audio cable to the
jack labeled “LINE OUT” on the back of
the SKYFi Home Stand. Connect the red
and white connectors to the input jacks
on the audio equipment you want to use
with SKYFi. Alternatively, you can connect
a set of powered speakers directly to the
SKYFi Home Stand by plugging the input
cable supplied with the speakers directly
into the “LINE OUT” jack.
2. Connect the XM Antenna to the jack
labeled “ANT” on the back of the SKYFi
Home Stand.
3. Connect the power adaptor to the con-
nector labeled “DC IN 6V” on the SKYFi
Home Stand.
4. Insert the SKYFi unit into the home stand
and press the power button.
Audio cable
XM
®
High-gain
Home Antenna
6V A/C power
adaptor
SKYFi Home Stand
Figure 1. SKYFi Home Kit components.
Caution:
Connect only appropriate input devices
to the SKYFi Home Stand jacks. Connecting an incorrect
input device may damage the system and/or the external
electronic device. It is recommended that you use only the
A/C power adaptor that came with your SKYFI Home Kit.
If you need to use a different adaptor, it must be a 6V,
1000mA DC adaptor and must contain a unified polarity-
type jack, identified by the symbol.
Note:
See SKYFi Operating Guide for important user
information.
1
