DeLorme Topo North America, Руководство пользователя

Страница: 223 / 369

Routing
209
Tip Select the Auto check box next to the Calculate button to automatically calculate the
route after you add each point.
Adding and Inserting Stops and Vias
Use stops and vias to route you through a particular place or along a particular road. You
can add or insert stops or vias in any route you create using the Route tab, the route
options on the toolbar, or by right-clicking the map (2-D only).
• A stop is a location along a route where you want to stop and then proceed from.
• A via is a point on the map that you want your route to go through.
•
Add stops or vias to follow a route in a particular order.
•
Insert stops or vias to arrange them geographically in the route.
Tips
•
Turn off Auto Calculate when you are adding many stops and vias.
• Use Add instead of Insert when your start and finish are at the same place.
• Don't place the finish point until you add all your stops and vias.
•
Place vias near the beginning of the road or trail you want to use.
•
When you calculate the route, if it goes to a via and then returns to the original path,
insert another via toward the end of that road (where you want to turn onto the next
road) to force it to use that road.
•
When using a road as a stop or via, zoom in to ensure you select the correct road.
The selected road segment is highlighted when you click it.
To Add a Stop or Via To Your Route