DèLonghi ECAM35X.75, Инструкция по эксплуатации

Страница: 20 / 27

19
11. "Rinse tank and fill with water": the appliance is now
ready to rinse with fresh water. Empty the container used
to collect the descaler solution. Extract the water tank,
empty, rinse under running water, fill with fresh water up
to the MAX level and put back in the appliance. Press
OK ;
12. "Place 1.8L container empty under spouts": place the con-
tainer used to collect the descaler solution empty under
the coffee spouts and hot water spout (fig. 33) and press
OK ";
13. "Rinsing Confirm?": press OK ;
11. "Rinsing underway": hot water is delivered first from the
coffee spouts, then from the hot water spout;
12. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water;
13. "Rinse tank and fill with water": extract the water tank and
fill with fresh water up to the MAX level. Press
OK
;
14. "Insert filter": put the water softener filter (if removed)
back in its housing in the water tank, and replace the tank
in the appliance. Press
OK ;
15. "Place 1.8L container empty under spouts": place the con-
tainer used to collect the descaler solution empty under
the hot water spout. Press
OK ;
16. "Rinsing Confirm?": press
OK
.
17. "Rinsing underway". Hot water comes out of the hot water
spout;
18. "Empty drip tray": At the end of the second rinse, remove,
empty and replace the drip tray (A15) and grounds con-
tainer (A11). Press
OK
;
19. "Descale complete": press OK ;
20. "Fill tank": empty the container used to collect the rinse
water, remove the water tank and fill with fresh water up
to the MAX level, then put back in the appliance.
Descaling is complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A11) to contain water;
• If the water tank has not been filled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been completely
eliminated from the machine's internal circuits.
• The appliance may request descaling cycles at very short
intervals. This is normal and due to the appliance’s ad-
vanced control system.
16. SETTING WATER HARDNESS
The descale message is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness level of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
16.1 Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)
from its pack (attached to the English instructions);
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level;
16.2 Setting water hardness
1. Press (B6) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "General" is
displayed between the two lines. Press
OK
;
3. Press the selection arrows until "Water hardness" is dis-
played, then press
OK
;
4. The current selection appears on the display and the new
selection flashes. Press the selection arrows until the re-
quired new selection is displayed. Press
OK
.
The new level is saved and the appliance goes back to the "Gen-
eral" menu.
Press /
ESC (B5) twice to go back to the main screen.
17. WATER SOFTENER FILTER
Certain models are fitted with a water softener filter (C4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the filter correctly, follow the instructions below.
15. DESCALING
Important!
• Before use, read the instructions and the labelling on the
descaler pack.
• You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer's guarantee.
Descale the machine when "Descale, ESC to cancel, OK to des-
cale (
∼
45 minutes)" appears on the display (B1). To descale im-
mediately, press
OK
(B3) and follow the instructions from point
6. To descale the appliance later, press ESC (B5). The symbol
on the display reminds you that the appliance needs descaling.
To access the descaling menu:
1. Turn the appliance on and wait until it is ready for use;
2. Press (B6) to enter the "Settings" menu;
3. Press the selection arrows (B2 and B4) until "Maintenance"
is displayed between the two lines. Press OK (B3);
4. Press
OK
to select "Descale";
5. Confirm? (
∼
45 minutes)”. Press OK to confirm;
6. "Remove filter": extract the water tank (A17), remove the
water softener filter (C4) (if present) and empty the water
tank. Press
OK ;
7. "Pour descaler and water into tank": Pour the descaler into
the tank up to level A (corresponding to a 100 ml pack)
marked on the inner surface of the tank, then add water
(1 litre) up to level
B
(fig. 32) and put the water tank back.
Press OK ;
8. "Empty drip tray": Remove, empty and replace the drip
tray (A15) and grounds container (A11). Press OK ;
9. "Place 1.8L container empty under spouts": Place an empty
container with a minimum capacity of 1.8 litres under the hot
water spout (C6) and coffee spouts (A9) (fig. 33). Press
OK ;
1,8 l
33
Important! Danger
of burns
Hot water containing acid
flows out of the coffee spouts
and hot water spout. Take
care to avoid contact with
splashes of this solution.
10. "Descaling underway":
The descale programme
starts and the descaler liq-
uid comes out of the hot
water and coffee spouts. A series of rinses and pauses is
performed automatically to remove all the scale residues
inside the coffee machine;
After about 25 minutes, descaling stops;
soft water (level 1)
hard water (level 3)
very hard water (level 4)
slightly hard water (level 2)