25
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
Insert descaling spout
The descaling spout (C7) is not correctly in
place or is missing.
Insert the spout and push as far as it will go
(fig. 7). The appliance emits a beep (if the
beep function is enabled).
Insert milk container
The milk container (D) is not inserted
correctly.
Insert the milk container and push as far as it
will go (fig. 23). The appliance emits a beep (if
the beep function is enabled).
If needed, fill milk container using
the refill lid
While preparing milk-based beverages, if
the milk in the container is not enough to
make the selected beverage, the appliance
recommends you top up the container (D)
without removing it.
Open the refill lid (D2) on the milk container
lid (D1) and pour in the milk without exceed-
ing the MAX level.
Cleaning underway
The appliance has detected impurities in its
internal circuits.
Wait for the appliance to be ready again and
reselect the required beverage. Contact cus-
tomer services if the problem persists.
New settings not saved
While customising the beverages (see section
“14. Guided beverage customisation (My)
u
”),
preparation has been deliberately interrupt-
ed by pressing "Cancel" or an alarm has been
triggered.
Press "OK" to go back to the homepage (B) to view
the alarm causing the interruption. Follow the
instructions corresponding to the alarm displayed
(see section “21. Displayed messages
u
”)
→
