DeLonghi Maestosa EPAM96X.75, Инструкция по эксплуатации

Страница: 26 / 34

26
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
INSERT WATER TANK The tank (A25) is not correctly in place. Insert the tank correctly and press as far as it
will go.
CLOSE FRONT DOOR The front door (A16) is open or not closed
correctly. Close the front door and press until it clicks into
place, the machine emits a beep (if the beep
function is enabled).
STOP FILLING, WATER TANK
FULL The water tank (A25) is full. Stop filling immediately to avoid water over-
flowing from the water tank. Press " OK" to
confirm and go back to the homepage (B).
WATER CIRCUIT EMPTY. PRESS
OK TO START FILLING The water circuit is empty Place a container with a minimum capacity of
100 ml under the hot water/steam spout (F)
and press "OK" to deliver water. Delivery stops
automatically.
If the problem persists, make sure the water
tank (A25) is fully inserted.
A new water softener filter has been inserted
(C6)
Make sure you have followed the instructions
for inserting the new filter (section “20.1 In-
stalling the filter” and “20.2 Replacing the
filter”). If the problem continues, remove the
filter (section “20.3 Removing the filter”).
INSERT INFUSER ASSEMBLY The infuser (A27) has not been replaced after
cleaning.
Insert the infuser as described in section “17.9
Cleaning the infuser”