DeLonghi Maestosa EPAM96X.75, Инструкция по эксплуатации

Страница: 23 / 34

23
18. DESCALING
Important!
• Before use, read the instructions and the labelling on the
descaler pack.
• It is important to use De’Longhi descaler only. Using un-
suitable descaler and/or performing descaling incorrectly
may result in faults not covered by the manufacturer's
guarantee.
Descale the machine when the message "DESCALING NEEDED.
PRESS OK TO START (~45min)" flashes on the display (B1). To
descale the appliance immediately, press "OK" and follow the
instructions from point (6).
To descale the appliance later, press "Cancel". The symbol
(B7) appears on the homepage to remind you that the appli-
ance needs descaling. (The message appears each time you turn
the appliance on).
To access the descaling menu:
1. On the display (B1), press the settings menu icon (B6);
2. Select "Descale";
3. "Press OK to start descaling (~ 45 MIN)": press "OK" to
enter the guided procedure;
4. "Empty grounds container and drip tray": Press the button
(A15) and open the door (A16) (fig. 3).
Remove and empty the drip tray (A22) and coffee grounds
container (A18), then put both back in the appliance;
5. (If the filter is installed) "Remove water filter": extract the
water tank (A25), lift the lid(A24) and remove the fil-
ter(C6), then press "Next";
6. "Add De'Longhi descaler
(up to level A) and water
(up to level B)" ( fig. 61);
Pour the descaler into
the tank up to the level
A marked inside the tank
(equal to one 100 ml pack),
then add water (one litre)
up to level B. Put the water
tank (with lid) back in the
appliance, close the front
door and press "Next";
7. "Place 2l container under spouts. Press OK to start descal-
ing": place an empty container with a minimum capacity
of 2 litres under the hot water/steam spout (F) and coffee
spouts (A17) (fig. 8). Press OK to start the process ("Back"
to go back to the previous screen or "Cancel" to exit the
procedure, remembering to remove the descaling solution
from the tank)
61
A B
B
+
A
Important! Danger of scalding
Hot water containing acid flows from the hot water/steam and
coffee spouts. Take care to avoid contact with splashes of this
solution.
8. "Descaling underway. Please wait": The descale pro-
gramme starts and the descaler liquid comes out of the
hot water and coffee spouts (fig. 11). A series of rinses is
performed automatically to remove all the scale residues
inside the coffee machine;
After about 30 minutes, descaling stops;
9. "Rinse and fill water tank up to max level": the appliance
is now ready to rinse with fresh water. Empty the container
used to collect the descaler solution; open the front door by
pressing the button, extract the water tank, empty, rinse
under running water, fill with fresh water up to the MAX
level and put back in the appliance. Close the front door.
Press "Next";
10. "Place 2l container under spouts. Press "OK" to start rins-
ing": place the container used to collect the descaler solu-
tion empty under the coffee spouts and hot water/steam
spout (fig. 8) and press "OK" to start rinsing;
11. Hot water is delivered from the coffee spouts and hot
water/steam spout and "Rinsing. Hot water from spouts"
is displayed;
12. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water;
13. (If the filter was installed) "Insert filter into its housing":
press the button and open the front door (fig. 3); extract
the water tank and, if removed previously, put the filter
back. Press "Next" to continue;
14. "Rinse and fill water tank up to max level": fill the tank
with fresh water up to the MAX level, put back in the appli-
ance, close the door and press "Next" to continue;
15. "Place 2l container under spouts. Press OK to start rins-
ing": Place the container used to collect the descaler solu-
tion empty under the hot water/steam spout (fig. 8) and
press " Next" to start rinsing;
16. Hot water is delivered from the hot water/steam spout.
"Rinsing underway. Hot water from spouts" is displayed;
17. "Empty drip tray": empty the container used to collect the
rinsing water, press the button and open the front door
(fig. 3), remove and empty the drip tray (A14) and grounds
container (A10), then put back in the appliance;
18. "Descale complete": extract the water tank, top up to the
max level, put back in the appliance and close the front
door, then press "OK".
The descaling process is now complete.