Electric convector heater
4
Turning on
Plug into the mains, turn the thermostat dial (
B
) to maximum and turn the
appliance on by means of the power selector (
A
) as described below.
• Turn the selector to the
Min
position to select minimum power
(the Min power light comes on).
• Turn the selector to the
Med
position to select medium power (the
Med power light comes on).
• Turn the selector to the
Max
position to select maximum power
(the Max power light comes on).
Adjusting the thermostat
When the room has reached the required temperature, turn the ther-
mostat dial (
B
) slowly anticlockwise until the lights go out and no fur-
ther.The thermostat will automatically regulate the temperature set
and keep it constant. In spring or autumn or on mild days, you can save
energy by using minimum power.
Frost prevention mode
With the thermostat dial in the position and one of the power
levels selected, the appliance maintains room temperature at about
5°C, preventing freezing with minimal energy consumption.
Models with fan
A number of models have a fan for faster more even heating.To use
this function, turn the power selector (
A
) to the Max + Fan position
(the corresponding light comes on).
Using the timer(C)
To set the heating periods proceed as follows:
Setting the correct time
Check the time on your watch. If for example it is 4.00 pm. (16.00),
turn the dial in a clockwise direction until the number 16 is lined up
with the triangular pointer (fig.5).
N.B.: Never turn the dial in an anti-clockwise direction!
The timer is in effect, an electric clock and works only if the plug is
connected to the power supply.Whenever the plug is disconnected or
there is a power failure, the clock must be re-set.
To program the timer
1) Set the operating times by pushing in the notches on the dial corre-
sponding to the period required (each notch represents 15 mins.)
(fig.6).
2) Make sure that the timer indicates the correct time (see instruc-
tions on setting the correct time).
3) Select the desired function.
Once programmed in this way, the appliance will repeat the pre-estab-
lished program every day.
21
20
19
16
pointer
Fig.5
21
20
19
16
operating time
Fig.6
Содержание HCO series
Страница 7: ...5713005900 09 06...
