T E S T P R O C E DU R E F O R E S A M
DIG IT
To enter the "Test Mode" press simultaneously
"Short" and "Large" coffee, then plug on the
machine
Pressing the "MENU" button, the coffee heating
element goes ON. On the display: "HEATER ON"
(check with amperometer the power consumption)
Pressing the "CHANGE" button, the pump goes
ON. On the display: "PUMP ON". (the pump goes
on only with tank in place and water on it)
Pressing the "OK" button, the grinder
goes ON. On the display: "GRINDER ON"
Pressing the "ON / OFF" button, the motor will
move upwards. On the Dysplay: "MOTOR UP"
When the infuser will close the upper switch the
motor will stop and display will show: "LIMIT
SWITCH UP"
(the motor will move only with service
door closed and coffee ground container in place)
Pressing the "Taste" button, the motor will move
downwards. On the display:"MOTOR DOWN". When
the infuser will close the lower switch, the motor will
stop and the display will show: "LIMIT SWITCH
DOWN" (the motor will move only with service door
closed and coffee ground container in place)
Pressing the "SHORT COFFEE" button, the
electrovalve goes ON. On the display: "EV1 ON"
Pressing the "LARGE COFFEE" button, the
STEAM BOILER goes on. On the display:
"VAPORIZER ON"
(this operation only with the water/steam tap open,
check with amperometer the power consumption)
To EXIT the procedure, unplug the machine.
