1
Grinder Set-up for all models of the
Magnifica, Automatic coffee maker
2
3
4
5
Remove the coffee beans
container, the black finger saver
and the knob.
Turn the white shaft clockwise
till it stops. Remove the upper part
of the grinder by pulling it upwards.
Verify the position of the white
gasket (has to be as on the picture)
Remove the white plastic ring
by pulling it.
6
Now you can change the setting:
Turn the gear
clockwise* to
reduce the coarseness (finer coffee)
.
Turn the gear
counterclockwise*
to increase the courserness
(thicker)
.
7
Insert the white shaft, making
sure its larger notch is aligned with
the one on the grinder.
8
Insert the white ring making
sure its notch as well is inserted
on the correct position
9
Turn the shaft
CLOCKWISE
till it stops to insert the upper gear.
Then turn the shaft all the way
COUNTER CLOCKWISE.
(*) before to change the setting, check and mark the initial position taking as reference the
position of the metal ball you see through the holes on the white ring.
Change the setting carefully by turning the white ring of one or max two steps (one or two
holes) either way as required.
Turn the white shaft counter-
clockwise till it stops.
Pull to remove it.
