DeLonghi ESAM 4200, Инструкция по эксплуатации

Страница: 19 / 21

18
The coffee runs out too
quickly. • The coffee is ground too
coarsely. • Turn the grinding adjust-
ment knob one click anti-
clockwise towards the 1
while the coffee mill is in
operation. Avoid turning the
grinding coarseness regula-
tor excessively otherwise
when you select 2 cups, the
coffee may run out in drips.
PROBLEM POSSIBLE CAUSE REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact a Technical Assistance centre.
The coffee is not hot • The cups have not been
preheated.
• The infuser has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
• Heat the cups by rinsing
them in hot water or leaving
them to rest for at least 20
minutes on the cup warmer
tray.
• Before making coffee, heat
the infuser by pressing the
button).
The coffee is not creamy
enough • The coffee is ground too
coarsely.
• Wrong type of coffee
• Turn the grinding adjustment
knob one click anticlockwise
towards the 1 while the cof-
fee mill is in operation (fig.
17).
• Use a type of coffee for
espresso coffee makers.
The coffee runs out too slowly
or in drips. • The coffee is ground too
finely. • Turn the grinding adjust-
ment knob one click clock-
wise towards the 7 while
the coffee mill is in opera-
tion. Continue one click at a
time until coffee run-off is
satisfactory (fig. 17).