DeLonghi ECO311, Инструкция по эксплуатации

Страница: 18 / 22

1 7
Read the separate safety instructions before using the appliance.
1. DESCRIPTION
1.1 Description of the appliance
(page 3 - A )
A1. Steam/hot water dial
A2. Water tank lid
A3. Cup tray
A4. Removable water tank
A5. Cappuccino maker
A6. Spout
A7. Cappuccino maker nozzle
A8. Power cord
A9. Drip tray
A10. Cup tray
A11. Boiler outlet
A12. Presser
1.2 Description of control panel
(page 3 - B )
B1. ON/OFF button
B2. Coffee/hot water delivery button
B3. Steam button
B4. Power light
I
B5. Temperature OK for coffee/hot water light
B6. Temperature OK for steam light
1.3 Description of the accessories
(page 2 - C )
C1. Filter holder
C2. 1 coffee froth filter
C3. 2 coffee froth filter
C4. ESE pod froth filter
C5. Measure
C6. Descaler (*not included, can be purchased from authorised
Customer Services)
2. FILLING THE WATER TANK
1. Open the lid of the appliance (fig. 1), then extract the tank
by pulling upwards (fig. 2);
2. Fill the tank with fresh clean water, taking care not to ex-
ceed the MAX level indicated (fig. 3). Put the tank back in
the appliance, pressing lightly to open the valves located
on the bottom of the tank.
3. More simply, the tank can also be filled without removing
it, pouring the water directly from a jug.
Important: never operate the appliance without water in the tank or
without the tank.
3. SETTING UP THE APPLIANCE
1. Turn the appliance on by pressing the button (B1) (fig.
4): the power light
I
(B4) comes on ;
2. Insert the required coffee filter in the filter holder (C1) (fig.
5);
3. Attach the filter holder to the machine without filling it
with ground coffee (fig. 6);
4. Place a 0.5 litre container under the boiler outlet and an-
other 0.5 litre container under the cappuccino maker (fig.
7);
5. Wait for the OK light (B5) to come on (fig. 8), then immedi-
ately press the button (fig. 9) and deliver about half
the tank from the filter holder;
6. Turn the steam dial anti-clockwise (fig. 10) and deliver
all the water remaining in the tank from the cappuccino
maker;
7. Close the steam dial and press the button again;
8. Empty the two containers and replace them under the
boiler outlet and the cappuccino maker and repeat points
5-6-7.
Now the appliance is ready for use.
3.1 Auto-off
If the appliance is not used for a certain period of time (depend-
ing on the model), it switches off automatically (and the indica-
tor light goes out).
3.2 Tips for a hotter coffee
To make espresso coffee at the right temperature, the coffee
maker should be preheated as follows:
1. Turn the appliance on by pressing the
button (the I
light (B4) comes on) (fig. 4) and attach the filter holder to
the appliance without adding pre-ground coffee (fig. 6);
2. Place a cup under the filter holder. Use the same cup as will
be used to prepare the coffee in order to preheat it.
3. Wait until the OK light comes on (fig. 8) and immediately
afterwards press the button (fig. 9). Continue de-
livering water until the OK light goes off, then interrupt
delivery by pressing the same button again;
4. Empty the cup, wait until the
OK
light comes on again (B5)
and then repeat the same operation.
(It is normal for a small and harmless puff of steam to be given
off when removing the filter holder).
4. HOW TO MAKE ESPRESSO COFFEE USING PRE-
GROUND COFFEE
1. Place the ground coffee filter (C2) or (C3) in the filter hold-
er (C1). Use the filter to make one coffee or the
filter to make two coffees;
2. To make just one coffee, place one level measure of pre-
ground coffee (about 7 g) in the filter. (fig. 11). To make two