DeLonghi ECAM23450SL, Руководство пользователя

Страница: 17 / 23

18
alternating to “EMPTY GROUNDS
CONTAINER”
6. Completely empty the water tank (A9) and
remove the water softener filter (if present);
then empty the drip tray and the empty
grounds container and re-insert them.
7. Pour the descaler into the tank up to the level
A (corresponding to a 3.4 oz / 100 ml pack)
marked on the back of the tank (fig. 28A),
then add water (34oz. / one litre) up to level
B (fig. 28B); reinsert the water tank.
8. Place an empty container with a minimum
capacity of 50.7 oz. / 1.5 litres under the hot
water spout (fig. 4).
Important! Danger of burns
Hot water containing acid flows from the change
to hot water spout.
Avoid contact with splashes of water.
9. Press the button to confirm introduction
of the solution.
The message “Descaling...” is displayed.
The descaling program starts and the descaler
liquid comes out of the water spout.
The descale program automatically performs
a series of rinses and pauses to remove
limescale deposits from inside the machine.
Please note!
It is normal that the appliance is inactive for
several minutes between once rinsing and the
other.
After about 30 minutes, the message “FILL
TANK!” is displayed.
7. The appliance is now ready for rinsing
through with clean water. Remove the water
tank, empty, rinse under running water, fill
with clean water and replace. “Rinsing”
is displayed. “Rinsing... Confirm?” is
displayed.
8. Empty the container used to collect the
descaler solution and replace it empty under
the hot water spout.
9. Press the button to start rinsing. Hot
water flows out of the spout and the message
“Rinsing...” is displayed.
10. When the water tank is completely empty, “
Rinsing complete Confirm?” is displayed.
11. Press the button.
12. Insert the filter (if it was present) in the tank,
5. Rinse the inside of the
froth adjustment knob
under running water
(see figure alongside).
6. Check that the intake
tube and spout are
not clogged with milk
residues.
7. Replace the knob
(lining up the arrow
with the word “INSERT”) the spout and the
milk intake tube.
8. Place the lid back on the milk container.
cleaning the hot
water/steam nozzle
Each time you prepare
milk, clean the nozzle
with a sponge to
remove milk residues
from the gaskets (see
figure).
Descale
Descale the machine when the message
“DESCALE!” flashes on the display.
Important!
Descaler contains acids which may irritate the
skin and eyes.
It is vital to respect the manufacturer’s safety
warnings given on the descaler pack and the
warnings relating to the procedure to follow in
the event of contact with the skin and eyes.
Please note!
Use De’Longhi descaler only.
Under no circumstances should you use
sulphamic or acetic based descalers. Their use
invalidates the guarantee. Failure to descale
the appliance as described also invalidates the
guarantee.
1. Turn the machine on and wait for the
appliance to be ready for use.
2. Press the p button to enter the menu.
3. Turn the selection knob (fig. 7) until
“Descaling” is displayed.
4. Select by pressing the button: Descaling
Confirm?” is displayed. Press again to
activate the function.
5. The message “Add descaler Confirm?”
25