21
en
DisplayeD messaGes
DisplayeD messaGe
possiBle cause
remeDy
FILL TANK !
•
Insufficient water in the tank.
•
Fill the tank with water and/or insert it
correctly, pushing it as far as it will go
until it clicks into place (fig. 3B).
EMPTY GROUNDS
CONTAINER!
•
The grounds container (A14) is full.
•
Empty the grounds container and
drip tray, clean and replace (fig. 22).
Important: When removing the drip tray,
the grounds container must be emptied,
even if it is not completely full. If this
is not done, when you make the next
coffees, the grounds container may fill
up more than expected and clog the
machine.
GROUND TOO FINE
ADJUST MILL!
alternating with...
insert water spout and
press OK
•
The grinding is too fine and the coffee is
delivered too slowly or not at all.
•
Repeat coffee delivery and turn the
grinding adjustment knob (fig. 9) one
click clockwise towards “7” while the
coffee mill is in operation. If after
making at least 2 coffees delivery is
still too slow, repeat the correction
procedure, turning the grinding
adjustment knob another click (see the
section “Adjusting the coffee mill” on
page 13). If the problem persists, press
the
button and deliver a little
water from the spout.
INSERT GROUNDS
CONTAINER!
•
After cleaning, the grounds container
has not been replaced.
•
Remove the drip tray and insert the
grounds container.
ADD PRE-GROUND
COFFEE!
•
The “pre-ground coffee” function has
been selected without placing any pre-
ground coffee in the funnel.
•
Place pre-ground coffee in the funnel or
deselect the “pre-ground” function.
DESCALE!
•
The machine must be descaled.
•
The descaling procedure described in the
“Descaling” section (page 17) needs to be
performed as soon as possible.
LESS COFFEE!
•
Too much coffee has been used.
•
Select a milder taste or reduce the
quantity of pre-ground coffee.
FILL BEANS
CONTAINER!
•
The coffee beans have run out.
•
Fill the beans container
•
The pre-ground coffee funnel is clogged.
•
Empty the funnel with the help of a brush
as described in the section “Cleaning the
pre-ground coffee funnel”.
INSERT INFUSER
ASSEMBLY!
•
The infuser has not been replaced after
cleaning.
•
Insert the infuser as described in the
section “Cleaning the infuser” (page 17).
INSERT TANK
•
The tank is not correctly in place.
•
Insert the tank correctly and press as far
as it will go.
GENERAL ALARM!
•
The inside of the appliance is very dirty.
•
Clean the inside of the appliance
thoroughly, as described in the section
“Cleaning and maintenance” (page 16).
If the message is still displayed after
cleaning, contact a customer services.
REPLACE FILTER
•
The water softener filter is exhausted.
•
Replace the filter or remove it as
described in the section “Water softener
filter” (page 19).
Содержание ECAM23450SL
Страница 1: ...2 2 B1 B10 B7 C3 C5 C2 C1 B8 B9 D1 D2 D4 D3 B6 B3 B2 B4 B5 B C D C4...
Страница 2: ...3 3 P U S H A1 A10 A11 A13 A14 A17 A16 A18 A15 A9 C4 A8 A A12 A19 A3 A5 A6 A7 A4 A2...
Страница 3: ...4 1 2 3A 3B 4 5 6 7 8 9 10 11 12 13 14 15 16 4...
Страница 4: ...5 P U S H P U S H B A A B 18 17 19 20 21 23 24 25A 25B 26 27 28 29 30 31A 31B 22 CLEAN 5...
