DeLonghi ECAM23450SL, Руководство пользователя

Страница: 10 / 23

11
en
auto-start
You can set the auto-start time in order to
have the appliance ready at a certain time (for
example in the morning) so you can make coffee
immediately.
Please note!
To activate this function, the time must already
have been set correctly.
To activate Auto-on, proceed as follows:
1. Press the p button to enter the menu;
2. Turn the selection knob (fig. 7) until “Auto-
start” is displayed;
3. Press the button. “Activate?” is
displayed;
4. Press the button to confirm;
5. Turn the selection knob to choose the hours;
6. Press the button to confirm;
7. Turn the selection knob (fig. 7) to change the
minutes;
8. Press the button to confirm;
9. Press the button to exit the menu.
Once the time has been confirmed, activation
of auto-start is indicated by the symbol
displayed alongside the time and under the Auto-
start item in the menu.
To deactivate the function:
1. Select auto-start from the menu;
2. Press the button. “Deactivate?” is
displayed;
3. press the button to confirm.
The symbol is no longer displayed.
setting the temperature
To modify the temperature of the water used to
make the coffee, proceed as follows:
1. Press the
p
button to enter the menu;
2. Turn the selection knob (fig. 7) until “Set
temperature” is displayed;
3. Press the button;
4. Turn the selection knob until the required
temperature (
l
= low;
llll
= high) is
displayed;
5. Press the button to confirm;
6. Press the button to exit the menu.
energy saving
Use this function to activate or deactivate energy
saving mode. When activated, the function
reduces energy consumption.
When energy saving mode is active, an asterisk
appears below “Energy Saving” in the menu.
To deactivate or activate “Energy Saving” mode,
proceed as follows:
1. Press the p button to enter the menu;
2. Turn the selection knob (fig. 7) until “Energy
Saving” is displayed;
3. Press the button. “Deactivate?” is
displayed, or “Active?” if the function has
already been disabled.
4. Press the button to deactivate energy
saving mode;
5. Then press the button to exit the
menu.
When the function is active, if the machine is
not used for about 1 minute, “Energy Saving” is
displayed.
Please note!
When in energy saving mode, a few seconds
may elapse before the first coffee is delivered as
the appliance must heat up again.
setting water hardness
For instructions on setting water hardness, see
page 19.
setting the language
To change the language for the display, proceed
as follows:
1. Press the p button to enter the menu;
2. Turn the selection knob (fig. 7) until “Set
language” is displayed;
3. Press the button;
4. Turn the selection knob until the required
language is displayed;
5. Press the button to confirm;
6. Press the button to exit the menu.
install filter
For instructions on how to install the filter, see
the section “Installing the filter” on page 19.
replacing the filter
For instructions on how to replace the filter, see
the section “Replacing the filter” on page 19.
activate/deactivate the beep
This activates or deactivates the beep emitted by
the machine each time the buttons are pressed
or an accessory is inserted/removed.