20
LIGHTS DISPLAYED
POSSIBLE CAUSE
REMEDY
FLASHING
FLASHING
The grinding is too fine and the coffee is
delivered too slowly or not at all
Repeat coffee delivery and turn the grinding
adjustment dial (A5 - fig. 8) one click clockwise
towards "7" while the coffee grinder is in oper-
ation. If after making at least 2 coffees delivery
is still too slow, repeat the correction procedure,
turning the grinding adjustment dial another
click until delivery is correct (see section “13.1
Adjusting the coffee grinder”). If the problem
persists, make sure the water tank (A17) is fully
inserted, turn the steam/hot water dial (A22) to
the
I
position and deliver a little water until the
flow is regular.
If the water softener filter (C4) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Deliver a little water by turning the steam/hot
water dial (A22) to the
I
position until the flow
is regular.
FLASHING
FLASHING
The pre-ground coffee used is too fine
and the coffee is delivered too slowly or
not at all
Repeat coffee delivery using less pre-ground
coffee, or a different type. If the problem persists,
make sure the water tank (A17) is fully inserted,
turn the steam/hot water dial (A22) to the
I
position and deliver a little water until the flow
is regular.
If the water softener filter (C4) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Deliver a little water by turning the steam/hot
water dial (A22) to the
I
position until the flow
is regular.
FLASHING
+
OK
ON STEADILY
A LONG coffee with pre-ground coffee
has been requested
Put one level measure (C2) of pre-ground cof-
fee into the pre-ground coffee funnel (A4) and
press
OK
(B15) to continue and complete
preparation.
ON STEADILY
FLASHING
Too much coffee has been used
Select a lighter taste by pressing
(B8) or
reduce the quantity of pre-ground coffee.
The
TrueBrew Over Ice ™ Coffee but-
ton have been pressed without selection
the strength
Select the strength and then press thethe
TrueBrew Over Ice™ button.