DeLonghi Dinamica Plus ECAM37 70 Series, Инструкция по эксплуатации

Страница: 20 / 28

20
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
INSERT WATER SPOUT The hot water spout (D6) is not inserted or is
inserted incorrectly Insert the water spout as far as it will go.
INSERT MILK CONTAINER The milk container (E) is not inserted correctly. Insert the milk container, pushing it as far as
it will go.
INSERT INFUSER ASSEMBLY The infuser (A20) has not been replaced after
cleaning. Insert the infuser as described in section "12.9
Cleaning the infuser".
WATER CIRCUIT EMPTY
PRESS OK TO START The water circuit is empty Press the selector corresponding to "OK" to
deliver water from the spout (D6) until it flows
out normally.
If the problem persists, make sure the water
tank (A17) is fully inserted.