DeLonghi AP 1246 G, Инструкция по установке и обслуживанию, Страница: 52 / 56

52
A
B
REPLACING THE OVEN LIGHT
(fig. 8.16)
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
■
Let the oven cavity and the heating elements cool down;
■
Switch off the electrical supply;
■
Remove the protective cover (fig. 8.16);
■
Unscrew and replace the bulb with a new one suitable for high temperatures
(300 °C) having the following specifications: 230-240 V~, 50 Hz, 40W, E14
■
Refit the protective cover
NOTE : Oven bulb replacement is not covered by your guarantee
REMOVING THE OVEN DOOR
The oven door can easily be removed as follows:
■
Open the door to the full extent (fig. 8.17a).
■
Open the lever “A” completely on the left and right hinges (fig. 8.17b).
■
Hold the door as shown in fig. 8.17.
■
Gently close the door (fig. 8.17c) until left and right hinge levers “A” are hooked
to part “B” of the door (fig. 8.17b)
■
Withdraw the hinge hooks from their location following arrow “C” (fig. 8.17d).
■
Rest the door on a soft surface.
■
To replace the door, repeat the above steps in reverse order.
B
A
C
C L E A N I N G & M A I N T E N A N C E
Figure 8.16
Figure 8.17
Figure 8.17a
Figure 8.17b Figure 8.17d
Figure 8.17c