13
Handle position
Handle position
Maintenance and Service
Remark: Turn off the unit and pull out the plug before maintain or send the unit to service center.
1.
Surface cleaning
Clean the unit surface with wet and soft cloth, but do not use chemical solvents such as alcohol and gasoline to
avoid any damage to unit.
2.
Filter cleaning
Clean the filter every two weeks, otherwise it would influence the unit performance if filter clogged with dust.
Grip the filter handle and take it out gently in correct direction (as Photo).
`
Clean the filters gently in warm water (about
104
℉
（
40
℃）
) mixed with detergent, and dry in the shade (as
Photo).
push filter in even force gently into correct place to avoid any damage.
Notes:
Do not squash the mesh.
Do not hit the mesh with sharp objects or brush.
End of Season Storage
1.
Screw off the drain cover, and then pull out the stopper to drain water completely.
Note: the tilt angle of the unit must be
≦
30
degrees.
2.
Keep the unit running in fan mode half day to dry inside of unit completely to prevent from going mouldy.
3.
Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug into the
universal fixing hole at the back panel of the unit, install the water plug and drain cap.
4.
Remove the heat exhaust hose assembly, clean and keep it properly.
Notes:
Hold the exhaust hose assembly with both hands when removal.
Push the fasteners aside on exhaust air outlet using your thumbs, then pull out exhaust hose assembly.
Drain cap
