Dell XPS 400 Скачать руководство пользователя страница 29

Страница: 29 / 69

System Setup: Dell XPS 400 Service Manual

file:///T|/htdocs/systems/xps400/sm/syssetup.htm[8/3/2012 3:11:21 PM]

USB Flash Device —

Insert the memory device into a USB port and restart the computer. When

F12 = Boot Menu

appears in the upper-right corner of the screen, press <F12>. The BIOS detects the device and adds the USB flash

option to the boot menu.

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device

documentation.

Changing Boot Sequence for the Current Boot

You can use this feature, for example, to restart your computer to a USB device such as a floppy drive, memory key, or CD-

RW drive.

NOTE:

If you are booting to a USB floppy drive, you must first set the floppy drive to OFF in

system setup

1. If you are booting to a USB device, connect the USB device to a USB connector (see "

Back View of the Computer

").

2. Turn on (or restart) your computer.

3. When

F2 = Setup, F12 = Boot Menu

appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows

desktop. Then shut down your computer and try again.

The

Boot Device Menu

appears, listing all available boot devices. Each device has a number next to it.

4. At the bottom of the menu, enter the number of the device that is to be used for the current boot only.

For example, if you are booting to a USB memory key, highlight

USB Flash Device

and press <Enter>.

NOTE:

To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device

documentation.

Changing Boot Sequence for Future Boots

1. Enter

system setup

2. Use the arrow keys to highlight the

Boot Sequence

menu option and press <Enter> to access the menu.

NOTE:

Write down your current boot sequence in case you want to restore it.

3. Press the up- and down-arrow keys to move through the list of devices.

4. Press the spacebar to enable or disable a device (enabled devices have a checkmark).

5. Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

1. Follow the procedures in "

Before You Begin

Содержание XPS 400






































































Результаты поиска

Содержание XPS 400

Отзывы:

Похожие инструкции для XPS 400

Бренды по названию

Популярные бренды

Dell XPS 400, Руководство по обслуживанию

Результаты поиска

Содержание XPS 400

Отзывы:

Похожие инструкции для XPS 400

Бренды по названию

Популярные бренды