Dell Wyse 5470, Руководство по обслуживанию

Страница: 59 / 79

Steps
1 Place the display panel on a flat and clean surface.
2 Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable.
3 Adhere the tape that secures the display cable to the back of the display panel.
4 Turn the display panel over and place it on the display back-cover.
5 Align the screw holes on the display panel with the screw holes on the display back-cover.
6 Replace the eight screws (six M2.5x2.5 and two M2x2) that secure the display panel to the display back-cover.
Next steps
1 Installing the display bezel .
2 Installing the display assembly .
3 Installing the WLAN .
4 Installing the battery .
5 Installing the base cover .
6 Installing the SD memory card .
7 Follow the procedure in After working on your thin client .
Camera
Removing the camera
Prerequisites
1 Follow the procedure in Before working on your thin client .
2 Removing the SD memory card .
3 Removing the base cover .
4 Removing the battery .
5 Removing the WLAN .
6 Removing the display assembly .
7 Removing the display bezel .
8 Removing the display panel .
About this task
The following image indicates the location of the camera and provides a visual representation of the removal procedure:
Removing and installing components 59