Dell Wyse 5470, Руководство по обслуживанию

Страница: 36 / 79

Steps
1 Align the screw holes on the VGA daughterboard with the screw holes on the palm-rest and keyboard assembly.
2 Replace the two screws (M2x3) that secure the VGA daughterboard on the palm-rest and keyboard assembly.
3 Connect the VGA board cable to the system board.
4 Route the display cable through the routing guide.
5 Connect the display cable to the system board.
6 Slide the CAC reader cable to the respective port on the system board and close the latch to secure the cable.
Next steps
1 Installing the battery .
2 Installing the base cover .
3 Installing the SD memory card .
4 Follow the procedure in After working on your thin client .
Display assembly
Removing the display assembly
Prerequisites
1 Follow the procedure in Before working on your thin client .
2 Removing the SD memory card .
3 Removing the base cover .
4 Removing the battery .
5 Removing the WLAN .
36 Removing and installing components