Dell Wyse 5470, Руководство по обслуживанию

Страница: 64 / 79

System setup
Accessing thin client BIOS settings
About this task
This section describes about the Wyse 5470 thin client UEFI BIOS settings. While starting a thin client, a Dell logo is displayed for a short
period.
Steps
1 During start-up, press the F2 key. and enter the default password
Fireport
.
The BIOS settings dialog box is displayed.
2 Use the System Setup settings to change the BIOS settings.
NOTE: There is an option to restore BIOS defaults, Factory Defaults, and Custom user settings for Users in the BIOS
menu. BIOS default setting restores the values that were part of the BIOS file. Restoring Factory default restores the
BIOS setting to the values that was configured in factory before shipping the client.
System Setup overview
System Setup enables you to:
• Change the system configuration information after you add, change, or remove any hardware in your thin client.
• Set or change a user-selectable option such as the user password.
• Read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, Dell recommends that you write down the System Setup screen information for future reference.
CAUTION: Unless you are an expert thin client user, do not change the settings for this program. Certain changes can cause your
thin client to work incorrectly.
Boot Sequence
Boot Sequence enables you to bypass the System Setup–defined boot device order and boot directly to a specific device. During the
Power-on Self-Test (POST), when the Dell logo is displayed, you can:
• Access System Setup by pressing the F2 key
• Bring up the one-time boot menu by pressing the F12 key
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
• UEFI Boot
– UEFI: 32GB SATA Flash Drive, Partition X
• Other options
– BIOS Setup
– BIOS Flash Update
– Diagnostics
NOTE: If you select the Diagnostics option, the ePSA diagnostics screen is displayed. To access the System setup menu,
click BIOS Setup.
3
64 System setup