9.
Remove the two screws from the display assembly hinges.
10.
Remove the display assembly from the computer base.
Replacing the Display Assembly
1.
Align the display assembly hinges with the holes in the base of the computer and then lower the display into place.
2.
Replace and tighten the two display assembly hinge screws.
3.
Carefully route the display cables and the speaker cable into their routing guides and connect them to the respective system board connectors.
4.
Carefully slide the Mini-Card antenna cables through the system board and into their routing guides.
5.
Replace the palm rest (see
Replacing the Palm Rest
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the module cover (see
Replacing the Module Cover
).
8.
Slide the battery into the battery bay, until it clicks into place and slide the battery-lock latch towards the lock position.
Display Bezel
1
display cables
2
Mini-Card antenna cables
3
speaker cable
1
display cable connectors
2
screw (2)
3
speaker cable connector
Содержание Vostro A90
Страница 10: ...Back to Contents Page ...