Dell Vostro 3350 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 113

background image

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not
on the cable itself. Some cables have connectors with locking tabs; if you are
disconnecting this type of cable, press in on the locking tabs before you disconnect
the cable. As you pull connectors apart, keep them evenly aligned to avoid bending
any connector pins. Also, before you connect a cable, ensure that both connectors
are correctly oriented and aligned.

NOTE: The color of your computer and certain components may appear differently
than shown in this document.

To avoid damaging your computer, perform the following steps before you begin

working inside the computer.

1. Ensure that your work surface is flat and clean to prevent the computer

cover from being scratched.

2. Turn off your computer (see

Turning Off Your Computer

).

3. If the computer is connected to a docking device (docked) such as the

optional Media Base or Battery Slice, undock it.

CAUTION: To disconnect a network cable, first unplug the cable from your
computer and then unplug the cable from the network device.

4. Disconnect all network cables from the computer.
5. Disconnect your computer and all attached devices from their electrical

outlets.

6. Close the display and turn the computer upside-down on a flat work

surface.

NOTE: To avoid damaging the system board, you must remove the main battery
before you service the computer.

7. Remove the main battery.
8. Turn the computer top-side up.
9. Open the display.
10. Press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer from the
electrical outlet before opening the display.

CAUTION: Before touching anything inside your computer, ground yourself by
touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.

8

«
...
6
7
8
9
10
...
»

Содержание Vostro 3350


















































































































Отзывы:

Нет отзывов

Похожие инструкции для Vostro 3350

Thinkpad X30 Series

Бренд: IBM Страницы: 100

Satellite C50-K

Бренд: dynabook Страницы: 46

Бренд: Gateway Страницы: 168

Бренд: Wyse Страницы: 4

TravelMate B3 11

Бренд: Acer Страницы: 85

Бренд: Acer Страницы: 376

Бренд: Acer Страницы: 75

Toughbook CF-72TCJUZPM

Бренд: Panasonic Страницы: 36

Classmate PC TRIGONOV401

Бренд: jp.ik Страницы: 57

Бренд: Dell EMC Страницы: 43

Бренд: Dell Страницы: 22

Бренд: Dell Страницы: 54

XPS 17 L701 Series

Бренд: Dell Страницы: 42

Alienware 13 R3

Бренд: Dell Страницы: 78

Бренд: Dell Страницы: 63

Бренд: Dell Страницы: 64

Бренд: Dell Страницы: 88

Бренд: Dell Страницы: 71

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды