Dell UP2414Q Скачать руководство пользователя

Страница: 43 / 74

Operating the Monitor



This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See

Monitor Specifications

for the Horizontal

and Vertical frequency ranges addressable by this monitor. Recommended
mode is 3840 x 2160.

You will see the following message before the DDC/CI function is disabled.

Dell UP2414Q

The function of adjusting display setting using PC application

will be disabled.

Do you wish to disable DDC/CI function?

Yes

When monitor enters

Power Save Mode

, the following message appears:

Dell UP2414Q

Entering Power Save Mode.

Activate the computer and wake up the monitor to gain access to the

OSD

If you press any button other than the power button, one of the following
messages will appear depending on the selected input:

Dell UP2414Q

There is no signal coming from your computer.

Press any key on the keyboard or move the mouse to wake it up.

If there is no display, press the monitor button now to select the correct

input source on the On-Screen-Display menu.

If either HDMI, DP or m-DP input is selected and the corresponding cable is
not connected, a floating dialog box as shown below appears.

Dell UP2414Q

No DisplayPort Cable

The display will go into Power Save Mode in 5 minutes.

www.dell.com/support/monitors

Содержание UP2414Q











































































Результаты поиска

Содержание UP2414Q

Отзывы:

Похожие инструкции для UP2414Q

Бренды по названию

Популярные бренды

Dell UP2414Q, Руководство пользователя

Результаты поиска

Содержание UP2414Q

Отзывы:

Похожие инструкции для UP2414Q

Бренды по названию

Популярные бренды