Dell UltraSharp U2422H Скачать руководство пользователя страница 8

Страница: 8 / 95

│

About Your Monitor

Product Features

The

Dell U2422H/U2422HX/U2422HE

monitor has an active matrix, Thin-Film

Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor
features include:

• 60.47 cm (23.80 in.) viewable area (measured diagonally). 1920 x 1080 (16:9)

resolution, plus full-screen support for lower resolutions.

• Wide viewing angle to allow viewing from a sitting or standing position.

• Color gamut of sRGB 100% and Rec. 709 100% with an average Delta E < 2;

also supports DCI-P3 85%.

• Digital connectivity with DisplayPort, HDMI, and USB-C (with DP Alternate

Mode) (U2422HE only).

• Single USB-C to supply power (PD 90 W) to a compatible notebook while

receiving video & data signal (U2422HE only).

• Tilt, swivel, height, and rotate adjustment capabilities.

• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling

easier setup with an elegant viewing experience.

• Removable stand and Video Electronics Standards Association (VESA™)

100 mm mounting holes for flexible mounting solutions.

• U2422H/U2422HX is equipped with 1 USB-C upstream port

(data only,

USB 3.2 Gen2, 10 Gbps), 2 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A

downstream ports

, 1 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A

downstream charging port

, and 1 super speed USB 10 Gbps (USB 3.2

Gen2) Type-C downstream port

• U2422HE is equipped with 1 USB-C upstream port

(video and data; DP1.4

with Alternate mode, PD up to 90 W), 1 USB-C upstream port

(data only,

USB 3.2 Gen2, 10 Gbps), 3 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A

downstream ports

, 1 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A

downstream charging port

, and 1 super speed USB 10 Gbps (USB 3.2

Gen2) Type-C downstream port

• USB-C

and RJ45 ports

enable a single-cable, network-connected

experience (U2422HE only).

• Plug and play capability if supported by your system.

Содержание UltraSharp U2422H
































































































Результаты поиска

Содержание UltraSharp U2422H

Отзывы:

Похожие инструкции для UltraSharp U2422H

Бренды по названию

Популярные бренды

Dell UltraSharp U2422H, Руководство пользователя

Результаты поиска

Содержание UltraSharp U2422H

Отзывы:

Похожие инструкции для UltraSharp U2422H

Бренды по названию

Популярные бренды