Dell sonicwall x series Скачать руководство пользователя страница 39

Страница: 39 / 45

Dell SonicWALL X-Series Solution Deployment Guide

Configuring the X-Series Solution in various topologies

Supporting such a topology, requires this configuration:

•

Port 3 is portshielded to X5 with dedicated uplink option.

•

Port 10 is portshielded to X5 and configured as a trunk to carry VLAN 100.

•

Port 11 is portshielded to X5 and configured as a trunk to carry VLAN 150.

•

Port 12 is portshielded to X5 and configured as an access to carry VLAN 200.

Configuring a Dedicated Uplink for a VLAN

Support for VLAN(s) can be achieved in a multi-step configuration process:

1 Provision the switch. The switch can be provisioned with the:

•

Firewall uplink and switch uplink set to

None

if support for VLAN(s) alone is needed.

•

Common uplink option if support is needed for an common trunk interface to carry PortShield
traffic for other firewall interfaces along with VLAN(s) support.

2 Configure the dedicated link by:

a Choosing an extended switch port that is connected physically to the firewall interface.

b Portshielding the port to the firewall interface.

c Choosing the dedicated link option.

3 Select the extended switch port on which VLAN(s) need to be enabled

4 Portshield the switch port to the firewall interface.

5 Configure the required VLAN(s) under the VLAN tab.

To configure a dedicated uplink for VLANs without a Common Uplink:

1 Provision the switch as described in

Provisioning an X-Switch on a TZ series appliance

on page

2 Set up the data uplink as described in

Adding an extended switch

on page

3 Configure the options as described in

Configuring a dedicated uplink

on page

except ensure to select

the

Dedicated Uplink

option.

When a dedicated uplink is set up for a given firewall interface, if VLAN(s) exist under the firewall
interface, a new tab,

VLANs

, displays on the

Edit Switch Port

dialog when the PortShield Interface is

selected:

Содержание sonicwall x series














































Результаты поиска

Содержание sonicwall x series

Отзывы:

Похожие инструкции для sonicwall x series

Бренды по названию

Популярные бренды

Dell sonicwall x series, Руководство по развертыванию

Результаты поиска

Содержание sonicwall x series

Отзывы:

Похожие инструкции для sonicwall x series

Бренды по названию

Популярные бренды