Dell SonicWALL X-Series Solution Deployment Guide
Configuring the X-Series Solution in various topologies
23
To add the switch to the firewall:
1 Set up the switch as described in
Provisioning an X-Switch on a TZ series appliance
2 Connect an RJ45 cable between TZ port X3 and X-Switch port 2.
3 Navigate to the
Network > Interfaces
page.
4 Ensure that X3 has an IP address in the range
192.168.2.x/24
.
5 Navigate to the
Network > PortShield Groups
page.
6 Click the
External Switch Configuration
tab.
7 Click the
Add Switch
button. The
Add External Switch
dialog displays.
8 Configure the
ID
through
Confirm Password
9 Select the port on the switch via which the firewall manages the switch from the
Switch Management
drop-down menu.
