Dell PRECISION T1650 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 61

background image

4

Diagnostics

Enhanced Pre-Boot System Assessment (ePSA) Diagnostics

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is
embedded with the BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of
options for particular devices or device groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

CAUTION: Use the system diagnostics to test only your computer. Using this program with other computers may
cause invalid results or error messages.

NOTE: Some tests for specific devices require user interaction. Always ensure that you are present at the
computer terminal when the diagnostic tests are performed.

1.

Power-on the computer.

2.

As the computer boots, press the <F12> key as the Dell logo appears.

3.

On the boot menu screen, select the Diagnostics option.
The Enhanced Pre-boot System Assessment window is displayed, listing all devices detected in the computer. The
diagnostics starts running the tests on all the detected devices.

4.

If you wish to run a diagnostic test on a specific device, press <Esc> and click Yes to stop the diagnostic test.

5.

Select the device from the left pane and click Run Tests.

6.

If there are any issues, error codes are displayed.
Note the error code and contact Dell.

47

«
...
45
46
47
48
49
...
»

Содержание PRECISION T1650






























































Отзывы:

Нет отзывов

Похожие инструкции для PRECISION T1650

EloPOS 15'' Series

Бренд: Elo Touch Solutions Страницы: 39

Бренд: WAGO Страницы: 52

Бренд: Vivo Страницы: 3

Бренд: Fanvil Страницы: 16

Бренд: Cybernet Страницы: 94

Бренд: Star Lake Страницы: 46

Бренд: Shuttle Страницы: 3

Бренд: Shuttle Страницы: 23

Бренд: JHCTech Страницы: 39

Premmia GX Series

Бренд: AST Страницы: 88

Бренд: Humanware Страницы: 56

Бренд: Faytech Страницы: 2

Бренд: Aaeon Страницы: 64

Бренд: EACA Страницы: 22

46572 HI-HILO-3

Бренд: Balt Страницы: 7

Бренд: Teasung Страницы: 8

DISA e-collaboration

Бренд: IBM Страницы: 51

IntelliStation POWER 285

Бренд: IBM Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды