Dell PRECISION T1650 Скачать руководство пользователя страница 42

Страница: 42 / 61

Option

Description

Intel

TurboBoost

™

Allows you to enable or disable

Intel TurboBoost

mode of the processor.

•

Disabled - Does not allow the TurboBoost driver to increase the performance

state of the processor above the standard performance.

•

Enabled - Allows the Intel TurboBoost driver to increase the performance of

the CPU or graphics processor.

Hyper-Thread Control

Allows you to enable or disable the Hyper-Threading technology. This option is

disabled by default.

Table 6. Power Management

Option

Description

AC Recovery

Specifies how the computer will respond when AC power is applied after a AC power

loss. You can set the AC Recovery to:

•

Power Off (default)

•

Power On

•

Last Power State

Auto On Time

This option sets the time of the day when you would like the system to turn on

automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The

startup time can be changed by typing the values in the time and A.M./P.M. fields.

•

Disabled - The system will not automatically power up.

•

Every Day - The system will power up every day at the time you specified

above .

•

Weekdays - The system will power up Monday through Friday at the time you

specified above.

•

Select Days - The system will power up on days selected above at the time

you specified above.

NOTE: This feature does not work if you turn off your computer using the switch

on a power strip or surge protector or if Auto Power is set to disabled.

Deep Sleep Control

Allows you to define the controls when Deep Sleep is enabled.

•

Disabled

•

Enabled in S5 only

•

Enabled in S4 and S5

This option is disabled by default.

Fan Control Override

Controls the speed of the system fan. This option is disabled by default.

NOTE: When enabled, the fan runs at full speed.

USB Wake Support

This option allows you to enable USB devices to wake the computer from standby.

•

Enable USB Wake Support - This option is disabled by default.

Wake on LAN

This option allows the computer to power up from the off state when triggered by a

special LAN signal. Wake-up from the Standby state is unaffected by this setting and

must be enabled in the operating system. This feature only works when the computer

is connected to AC power supply.

Содержание PRECISION T1650






























































Результаты поиска

Содержание PRECISION T1650

Отзывы:

Похожие инструкции для PRECISION T1650

Бренды по названию

Популярные бренды

Dell PRECISION T1650, Руководство пользователя

Результаты поиска

Содержание PRECISION T1650

Отзывы:

Похожие инструкции для PRECISION T1650

Бренды по названию

Популярные бренды