Dell PRECISION T1650 Скачать руководство пользователя страница 43

Страница: 43 / 61

Option

Description

•

Disabled - Does not allow the system to power on by special LAN signals

when it receives a wake-up signal from the LAN or wireless LAN.

•

LAN Only - Allows the system to be powered on by special LAN signals.

This option is Disabled by default.

Block Sleep

This option lets you block entering to sleep (S3 state) in operating system

environment.

•

Block Sleep (S3 state) - This option is disabled by default.

Table 7. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This option

is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is

enabled by default.

POST Hotkeys

Specifies whether the sign-on screen displays a message, that displays the keystroke

sequence required to enter the BIOS Boot Option Menu.

•

Enable F12 Boot Option menu - This option is enabled by default.

Table 8. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the

additional hardware capabilities provided by Intel Virtualization technology.

•

Enable Intel Virtualization Technology - This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional

hardware capabilities provided by Intel

Virtualization technology for direct I/O.

•

Enable Intel Virtualization Technology for Direct I/O - This option is enabled

by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can

utilize the additional hardware capabilities provided by Intel Trusted Execution

technology. The TPM virtualization technology, and Virtualization technology for

direct I/O must be enabled to use this feature.

•

Trusted Execution - This option is disabled by default.

Table 9. Maintenance

Option

Description

Service Tag

Displays the service tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option

is not set by default.

Содержание PRECISION T1650






























































Результаты поиска

Содержание PRECISION T1650

Отзывы:

Похожие инструкции для PRECISION T1650

Бренды по названию

Популярные бренды

Dell PRECISION T1650, Руководство пользователя

Результаты поиска

Содержание PRECISION T1650

Отзывы:

Похожие инструкции для PRECISION T1650

Бренды по названию

Популярные бренды