Dell Precision R5400 Скачать руководство пользователя страница 63

Страница: 63 / 64

The screen is difficult to read

Check the monitor cable connection

—

Ensure that the monitor cable is connected to the correct graphics card (for dual graphics card configurations).

If you are using the optional DVI-to-VGA adapter, ensure that the adapter is correctly attached to the graphics card and monitor.

Ensure that the monitor cable is connected as shown on the setup diagram for your computer.

Remove any video extension cables and connect the monitor directly to the computer.

Swap the computer and monitor power cables to determine if the monitor's power cable is defective.

Check the connectors for bent or broken pins (it is normal for monitor cable connectors to have missing pins).

Check the monitor power light

—

If the power light is lit or blinking, the monitor has power.

If the power light is off, firmly press the button to ensure that the monitor is turned on.

If the power light is blinking, press a key on the keyboard or move the mouse to resume normal operation.

Test the electrical outlet

—

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Check the diagnostic lights

—

See

Diagnostic Lights

Check the monitor settings

—

See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetizing (degaussing) the

monitor, and running the monitor self-test.

Move the subwoofer away from the monitor

—

If your speaker system includes a subwoofer, ensure that the subwoofer is positioned at least 60 centimeters

(2 feet) away from the monitor.

Move the monitor away from external power sources

—

Fans, fluorescent lights, halogen lamps, and other electrical devices can cause the screen image to

appear

shaky

. Turn off nearby devices to check for interference.

Rotate the monitor to eliminate sunlight glare and possible interference

Adjust the Windows display settings

—

Windows Vista

Click

Start

Control Panel

Hardware and Sound

Personalization

Display Settings

Adjust

Resolution

and

Colors settings,

as needed.

Windows XP:

Click

Start

Control Panel

Appearance and Themes

Click the area you want to change or click the

Display

icon.

Try different settings for

Color quality

and

Screen resolution

3D image quality is poor

Check the graphics card power cable connection

—

Ensure that the power cable for the graphics card(s) is correctly attached to the card.

Check the monitor settings

—

See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetizing (degaussing) the

monitor, and running the monitor self-test.

Dell Technical Update Service

The Dell Technical Update service provides proactive e-mail notification of software and hardware updates for your computer. The service is free and can be
customized for content, format, and how frequently you receive notifications.

NOTE:

For troubleshooting procedures, see the monitor's documentation.

Содержание Precision R5400

































































Результаты поиска

Содержание Precision R5400

Отзывы:

Бренды по названию

Популярные бренды

Dell Precision R5400, Руководство по обслуживанию

Результаты поиска

Содержание Precision R5400

Отзывы:

Бренды по названию

Популярные бренды