Dell Precision R5400 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 64

background image

Hardware Troubleshooter

If a device is either not detected during the operating system setup or is detected, but incorrectly configured, you can use the Hardware Troubleshooter to
resolve the incompatibility.

Windows

®

Vista

®

:

1.

Click the Windows Vista start button

,

and click

Help and Support.

2.

Type

hardware troubleshooter

in the search field and press <Enter> to start the search.

3.

In the search results, select the option that best describes the problem and follow the remaining troubleshooting steps.

Windows XP:

1.

Click

Start

®

Help and Support

.

2.

Type

hardware troubleshooter

in the search field and press <Enter> to start the search.

3.

In the

Fix a Problem

section, click

Hardware Troubleshooter

.

4.

In the

Hardware Troubleshooter

list, select the option that best describes the problem and click

Next

to follow the remaining troubleshooting steps.

Dell Diagnostics

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in

Solving Problems

, and then run the Dell Diagnostics before contacting Dell for

assistance.

Start the Dell Diagnostics from your hard drive or from the

Drivers and Utilities

media provided with your computer.

Starting the Dell Diagnostics From Your Hard Drive

Before running the Dell Diagnostics, enter the system setup program (see the

Dell Technology Guide

for instructions) to review your computer's configuration

information, and ensure that the device you want to test is displayed in the system setup program and is active.

The Dell Diagnostics is located on a separate diagnostic utility partition on your hard drive.

1.

Ensure that the computer is connected to an electrical outlet that is known to be working properly.

2.

Turn on (or restart) your computer.

3.

When the DELL logo appears, press <F12> immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your
computer and try again.

4.

Use the up- and down-arrow keys to select

Diagnostics

from the boot menu and then press <Enter>.

The computer runs the Pre-boot System Assessment (PSA), a series of initial tests of your system board, keyboard, display, memory, hard drive, and so
on.

l

Answer any questions that appear.

l

If failures are detected, write down the error code(s) and see

Contacting Dell

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at www.dell.com/regulatory_compliance.

NOTE:

The

Drivers and Utilities

media is optional and may not ship with your computer.

NOTE:

The Dell Diagnostics only operate on Dell computers.

NOTE:

If your computer does not display a screen image, contact Dell (see

Contacting Dell

).

NOTE:

Keyboard failure may result when a key is held down for extended periods of time. To avoid possible keyboard failure, press and release

<F12> in even intervals to open the Boot Device Menu.

«
...
50
51
52
53
54
...
»

Содержание Precision R5400

































































Отзывы:

Нет отзывов

Похожие инструкции для Precision R5400

Бренд: Fluidwell Страницы: 52

Бренд: Vecow Страницы: 127

Бренд: IEI Technology Страницы: 165

Бренд: EUROCOM Страницы: 176

Rigid-770 Series

Бренд: Arbor Technology Страницы: 119

EBOX-3310MX-S4C

Бренд: DMP Electronics Страницы: 41

Бренд: Vivo Страницы: 8

Бренд: Jesco Страницы: 56

Бренд: Asus Страницы: 66

Essentio CM5571

Бренд: Asus Страницы: 122

Бренд: Asus Страницы: 130

Essentio CM5675

Бренд: Asus Страницы: 71

Essentio CG1330

Бренд: Asus Страницы: 71

Essentio CM5671

Бренд: Asus Страницы: 71

Бренд: Asus Страницы: 166

Бренд: Asus Страницы: 134

Бренд: Asus Страницы: 140

Бренд: Asus Страницы: 178

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды