Dell Precision R5400 Скачать руководство пользователя страница 61

Страница: 61 / 64

Power, keyboard, and mouse extension cables

Too many devices connected to the same power strip

Multiple power strips connected to the same electrical outlet

Printer Problems

Check the printer documentation

—

See the printer documentation for setup and troubleshooting information.

Ensure that the printer is turned on

Check the printer cable connections

—

See the printer documentation for cable connection information.

Ensure that the printer cables are securely connected to the printer and the computer.

Test the electrical outlet

—

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Verify that the printer is recognized by Windows

—

Windows Vista

Click

Start

Control Panel

Hardware and Sound

Printer

If the printer is listed, right-click the printer icon.

Click

Properties and click Ports

Adjust the settings, as needed.

Windows XP:

Click

Start

Control Panel

Printers and Other Hardware

View installed printers or fax printers

If the printer is listed, right-click the printer icon.

Click

Properties

Ports

. For a parallel printer, ensure that the

Print to the following port(s):

setting is

LPT1 (Printer Port)

. For a USB printer, ensure

that the

Print to the following port(s):

setting is

USB

Reinstall the printer driver

—

See the printer documentation for information on reinstalling the printer driver.

Scanner Problems

Check the scanner documentation

—

See the scanner documentation for setup and troubleshooting information.

Unlock the scanner

—

Ensure that your scanner is unlocked (if the scanner has a locking tab or button).

Restart the computer and try the scanner again

Check the cable connections

—

See the scanner documentation for information on cable connections.

Ensure that the scanner cables are securely connected to the scanner and the computer.

Verify that the scanner is recognized by Microsoft Windows

—

Windows Vista

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at www.dell.com/regulatory_compliance.

NOTE:

If you need technical assistance for your printer, contact the printer's manufacturer.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at www.dell.com/regulatory_compliance.

NOTE:

If you need technical assistance for your scanner, contact the scanner's manufacturer.

Содержание Precision R5400

































































Результаты поиска

Содержание Precision R5400

Отзывы:

Похожие инструкции для Precision R5400

Бренды по названию

Популярные бренды

Dell Precision R5400, Руководство по обслуживанию

Результаты поиска

Содержание Precision R5400

Отзывы:

Похожие инструкции для Precision R5400

Бренды по названию

Популярные бренды