TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
© 2008 Teradici Corporation
Page 53 of 111
Figure 33: Attached Devices Webpage
1.8.2.1 Monitors
The
Monitors
section reports the
Name
,
Serial
Number, Vendor Identification (
VID
),
Product Identification (
PID
),
Date
and
Status
the monitor attached to each port. The
first line provides information for monitor 1, and the second line provides information
for monitor 2.
This option is available on a Portal and is available on the Host when in a PC-over-IP
session.
1.8.2.2 USB Devices
The
USB Devices
section reports the
Name
,
Serial
Number, Vendor Identification
(
VID
), Product Identification (
PID
),
Device Class
,
Sub Class, Protocol
, and
Status
for USB device attached to each port. The first line provides information for the first
USB port, followed by the second line for the second port, etc.
Table 9 summarizes the
USB Devices
possible
Status
descriptors
.
Table 9: USB Device Status
Status Description
Not Connected
No device connected
Standalone
Device detected outside of a PC-over-IP session
Not Initialized
Device detected in a PC-over-IP session, but host controller
has not initialized device
Failed Authorized
Device detected in a PC-over-IP session, but not authorized
(see Section 1.6.1)
Locally Connected Device detected and authorized, but locally terminated in a PC-
over-IP session (e.g. local cursor)
Connected
Device detected and authorized in a PC-over-IP session
