Dell Precision Mobile Workstation M4700 Скачать руководство пользователя страница 66

Страница: 66 / 89

Option

Description

•

Touchpad/PS-2 Mouse (Default Setting)

Numlock Enable

Specifies if the NumLock function can be enabled when the computer boots. This

option is enabled by default.

•

Enable Numlock

Fn Key Emulation

Allows you to match the <Scroll Lock> key feature of PS-2 keyboard with the <Fn>

key feature in an internal keyboard. The option is enabled by default.

•

Enable Fn Key Emulation

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option

is enabled by default.

•

Enable Keyboard Error Detection

POST Hotkeys

Specifies whether the sign-on screen displays a message, that displays the

keystroke sequence required to enter the BIOS Boot Option Menu.

•

Enable F12 Boot Option menu - This option is enabled by default.

Table 9. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the

additional hardware capabilities provided by Intel Virtualization technology.

•

Enable Intel Virtualization Technology - Default Setting.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional

hardware capabilities provided by Intel Virtualization technology for direct I/O.

•

Enable Intel Virtualization Technology for Direct I/O - Default Setting.

Table 10. Wireless

Option

Description

Wireless Switch

Allows you to determine which wireless device can be controlled by the wireless

switch. The options are:

•

WWAN

•

Bluetooth

•

WLAN

All options are enabled by default.

Wireless Device Enable

Allows you to enable or disable the wireless devices. The options are:

•

WWAN

•

Bluetooth

•

WLAN

Содержание Precision Mobile Workstation M4700


























































































Результаты поиска

Содержание Precision Mobile Workstation M4700

Отзывы:

Похожие инструкции для Precision Mobile Workstation M4700

Бренды по названию

Популярные бренды

Dell Precision Mobile Workstation M4700, Руководство пользователя

Результаты поиска

Содержание Precision Mobile Workstation M4700

Отзывы:

Похожие инструкции для Precision Mobile Workstation M4700

Бренды по названию

Популярные бренды