Dell Precision M90 Скачать руководство пользователя страница 32

Страница: 32 / 55

Back to Contents Page

Hinge Cover

Dell Precision™ M90 Mobile Workstation Service Manual

Removing the Hinge Cover

Replacing the Hinge Cover

Removing the Hinge Cover

Follow the instructions in

Before Working Inside Your Computer

Open the display all the way (180 degrees) so that it lies flat against your work surface.

Using a small flat-blade screwdriver, insert the screwdriver on the right side to gently pry the hinge cover loose.

Pulling up from right to left, remove the hinge cover.

Replacing the Hinge Cover

With the display open all the way (180 degrees) so that it lies flat against the work surface, snap the cover back into place, starting from left to right.

Back to Contents Page

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTICE:

The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.

NOTICE:

To help avoid damage to the hinge cover, ensure that it is snapped securely into place before you rotate the display open to 180 degrees.

hinge cover

Содержание Precision M90
























































Результаты поиска

Содержание Precision M90

Отзывы:

Похожие инструкции для Precision M90

Бренды по названию

Популярные бренды

Dell Precision M90, Руководство по обслуживанию

Результаты поиска

Содержание Precision M90

Отзывы:

Похожие инструкции для Precision M90

Бренды по названию

Популярные бренды