Dell Precision M90 Скачать руководство пользователя страница 12

Страница: 12 / 55

Install the replacement Mini-Card:

Align the Mini-Card with the connector at a 45-degree angle, and press the Mini-Card down into the securing clips until the card clicks into place.

Connect the antenna cables to the antenna connectors on the Mini-Card by matching the color of the cable to the color of the triangle above the

connector. Connect the main antenna cable (white) to the antenna connector with the white triangle. Connect the auxiliary antenna cable (black)
to the antenna connector with the black triangle.

Replace the Mini-Card/modem cover.

Back to Contents Page

securing clips (2)

Mini-Card

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

1 securing clips (2)

antenna connectors (2)

3 Mini-Card connector

NOTICE:

To avoid damaging the Mini-Card, never place cables under the card.

NOTE:

If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on your card.

Содержание Precision M90
























































Результаты поиска

Содержание Precision M90

Отзывы:

Похожие инструкции для Precision M90

Бренды по названию

Популярные бренды

Dell Precision M90, Руководство по обслуживанию

Результаты поиска

Содержание Precision M90

Отзывы:

Похожие инструкции для Precision M90

Бренды по названию

Популярные бренды