manualshive.com logo in svg

Dell Precision 17 7710, Руководство пользователя

Поделиться
Скачать
Dell Precision 17 7710 Скачать руководство пользователя страница 48

Option

Description

•

Enable Intel Virtualization Technology

 (Default Setting)

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the 
additional hardware capabilities provided by Intel Virtualization 
technology for direct I/O.
•

Enable Intel VT for Direct I/O

 (Default Setting)

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor 
(MVMM) can utilize the additional hardware capabilities provided by Intel 
® Trusted Execution Technology. The TPM Virtualization Technology, 

and Virtualization Technology for Direct I/O must be enabled to use this 
feature. This option is disabled by default.
• Trusted execution

Table 11. Wireless

Option

Description

Wireless Switch

Allows you to determine which wireless device can be controlled by the 
wireless switch. The options are:
•

WWAN

•

WLAN

•

GPS (on WWAN Module)

•

Bluetooth

All options are enabled by default.

Wireless Device Enable

Allows you to enable or disable the wireless devices. The options are:
•

WWAN/GPS

•

WLAN

•

Bluetooth

All options are enabled by default.

Table 12. Maintenance

Option

Description

Service Tag

Displays the service tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. 

This option is not set by default.

BIOS Downgrade

This field controls flashing of the system firmware to previous revisions.
• Allow BIOS Downgrade

Data Wipe

This field allows users to securely erase data from all the internal storage 

devices.
• Wipe on Next Boot

Selecting this operation will securely erase all devices installed in the 

system. The following is a list of devices affected by this operation:

• Internal HDD

48

Содержание Precision 17 7710































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды