Dell Precision 17 7710 Скачать руководство пользователя

Страница: 45 / 62

Option

Description

you to enable or disable the additional
processor sleep states.
Default Setting:

C states

Intel TurboBoost

Allows you to enable or disable the Intel
TurboBoost mode of the processor.
Default Setting:

Enable Intel

TurboBoost

Hyper-Thread Control

Allows you to enable or disable the
HyperThreading in the processor.
Default Setting:

Enabled

Table 8. Power Management

Option

Description

AC Behavior

Allows the computer to power-on automatically, when AC adapter is
plugged. The option is disabled.
• Wake on AC

Auto On Time

Allows you to set the time at which the computer must turn on

automatically. The options are:
•

Disabled

(Default Setting)

• Every Day
• Weekdays
• Select Days

USB Wake Support

Allows you to enable the USB devices to wake the computer from

standby mode. The option is disabled
• Enable USB Wake Support

Wireless Radio Control

Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio

Default Setting: both the options are disabled.

Wake on LAN/WLAN

This option allows the computer to power up from the off state when

triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power

supply.
•

Disabled

- Does not allow the system to power on by special LAN

signals when it receives a wake-up signal from the LAN or wireless

LAN. (Default Setting)

• LAN or WLAN - Allows the system to be powered on by special LAN

signals or WLAN signals.

• LAN Only - Allows the system to be powered on by special LAN

signals.

Содержание Precision 17 7710































































Результаты поиска

Содержание Precision 17 7710

Отзывы:

Похожие инструкции для Precision 17 7710

Бренды по названию

Популярные бренды

Dell Precision 17 7710, Руководство пользователя

Результаты поиска

Содержание Precision 17 7710

Отзывы:

Похожие инструкции для Precision 17 7710

Бренды по названию

Популярные бренды