manualshive.com logo in svg

Dell PowerVault, Руководство пользователя, Страница: 312 / 396

Поделиться
Скачать
Dell PowerVault Скачать руководство пользователя страница 312

Parameters

Parameter

Description

allVirtualDisks

Specifies the properties for all virtual disks in the 
storage array.

virtualDisk or virtualDisks (name)

Specifies the name of the virtual disk for which to 
define properties. You can enter more than one 
virtual disk name if you use the 

virtualDisks 

parameter. You must put quotation marks (" ") and 
brackets ([ ]) around the virtual disk name. The 
virtual disk name and quotation marks must be 
inside the brackets.

virtualDisk

Specifies the WWID of the virtual disk for which 
you are setting properties. You can use the WWID 
instead of the virtual disk name to identify the 
virtual disk. You must put angle brackets (< >) 
around the WWID.

cacheFlushModifier

The maximum amount of time that data for the 
virtual disk stays in cache before the data is flushed 
to physical storage. Valid values are listed in the 
Notes section.

cacheWithoutBatteryEnabled

The setting to turn on or turn off caching without 
batteries. To turn on caching without batteries, set 
this parameter to 

TRUE

. To turn off caching 

without batteries, set this parameter to 

FALSE

.

mediaScanEnabled

The setting to turn on or turn off media scan for 
the virtual disk. To turn on media scan, set this 
parameter to 

TRUE

. To turn off media scan, set this 

parameter to 

FALSE

. (If media scan is disabled at 

the storage array level, this parameter has no 
effect.)

mirrorCacheEnabled

The setting to turn on or turn off the mirror cache. 
To turn on the mirror cache, set this parameter to 

TRUE

. To turn off the mirror cache, set this 

parameter to 

FALSE

.

modificationPriority

The priority for virtual disk modifications while the 
storage array is operational. Valid values are 

highest

, 

high

, 

medium

, 

low

, or 

lowest

.

owner

The RAID controller module that owns the virtual 
disk. Valid RAID controller module identifiers are 0 
or 1, where, 0 is the RAID controller module in slot 
0, and 1 is the RAID controller module in slot 1. Use 
this parameter only if you want to change the 
virtual disk owner.

312

Содержание PowerVault













































































































































































































































































































































































































Отзывы:

Нет отзывов