Dell PowerVault, Руководство пользователя

Страница: 298 / 396

Parameter Description
rollbackPriority
Determines whether system resources must be
allocated to the rollback operation at the expense
of system performance. A value of 0 indicates that
the rollback operation is prioritized over all other
host I/O. A value of 4 indicates that the rollback
operation must be performed with minimal impact
to the host I/O.
Notes
When you use this command, you can specify one or more of the optional parameters. You can use any
combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a
maximum of 30 characters.
You can set the
warningThresholdPercent
parameter and the
repositoryFullPolicy
parameter
for both the snapshot repository virtual disk or the snapshot virtual disk.
Scheduling Snapshots (Legacy)
You can use the
enableSchedule
and the
schedule
parameters to create snapshots for a snapshot
group. Automatic snapshots can be scheduled daily, weekly, or monthly (by day or by date). The
enableSchedule
parameter turns on or off the ability to schedule snapshots. When you enable
scheduling, you use the
schedule
parameter to define when you want the snapshots to occur.
Parameters
Parameter Description
immediate
Begins a snapshot operation immediately; a
snapshot virtual disk is created and a copy-on-
write operation begins.
startDate
Defines a specific start date snapshot virtual disk
creation. The format for this option is
MM:DD:YY
. If
no start date is provided, the current date is used.
For example:
startDate=06:27:11
.
scheduleDay
Defines a day of the week you want to create a
snapshot virtual disk and perform a copy-on-write
operation. The values that you can enter are:
monday
,
tuesday
,
wednesday
,
thursday
,
friday
,
saturday
,
sunday
, and all. For example:
scheduleDay=wednesday
.
startTime
Defines time of a day you want to create a
snapshot virtual disk and start performing a copy-
on-write operation. The format for entering the
time is
HH:MM
, where
HH
is the hour and
MM
is the
minute past the hour. Use a 24-hour clock. For
example:
startTime=14:27
, which corresponds
to 2:27 PM.
298