Dell PowerEdge systems 6300, Руководство пользователя

Страница: 56 / 143

3-24 Dell PowerEdge 6300 Systems User’s Guide
9HULI\6WDWXV
The Read After Write Verify option (menu option 2) is set to Hardware Level by
default. This option cannot be specified in the
startup.ncf or autoexec.ncf file.
However, the default can be set on the command line.
The available options are defined in Table 3-3.
0RXQW6WDWXV
Mounting causes a drive to come online as a NetWare storage device. Dismounted
drives are inactive and cannot be accessed.
Before you eject your current media, you should first dismount it (using menu
option 5). When the mount status is Dismounted, you can eject the media. However,
NetWare does not allow you to dismount media that are locked.
To insert your new media, wait for the drive to spin up, and then select the Removable
Drive Mount Status option.
7DEOH'ULYH6WDWXV,WHPV
0HQX2SWLRQ 'HIDXOW9DOXH
Volume Segments on Drive
1 Select for a list
Read After Write Verify
1 Hardware Level
Drive Light Status
1 Not supported
Driver Operating Status
1
Active
Removable Drive Mount Status
2 Mounted
Removable Drive Lock Status
2 Not Locked
1
Valid for both removable and nonremovable SCSI drives
2
Valid for removable media only
7DEOH5HDG$IWHU:ULWH9HULI\2SWLRQV
2SWLRQ6HWWLQJ )XQFWLRQ
Disabled All writes to SCSI disk drives are executed with the
SCSI Write command (0Ah or 2Ah).
Hardware Level All writes to SCSI disk drives are executed with the
SCSI Write and Verify command (2Eh) or (if this com-
mand is not supported by the drive) with the SCSI
Write command (0Ah or 2Ah), followed by the SCSI
Verify command (2Fh).
Software Level Not supported.