Dell PowerEdge R820 Скачать руководство пользователя страница 132

Страница: 132 / 143

Error Code

Message Information

LCD Message

Memory mirror lost on <

location

>. Power cycle system.

Details

The memory may not be seated correctly, misconfigured, or has
failed.

Action

Check the memory configuration. Re-seat the memory modules. If the
issue persists, see

Getting Help

MEM1208

Message

Memory spare redundancy is lost. Check memory device at location
<

location

LCD Message

Memory spare lost on <

location

>. Power cycle system.

Details

Memory sparing is no longer available.

Action

Re-seat the memory modules. If the issue persists, see

Getting Help

MEM8000

Message

Correctable memory error logging disabled for a memory device at
location <

location

LCD Message

SBE log disabled on <

location

>. Re-seat memory.

Details

Errors are being corrected but no longer logged.

Action

Review system logs for memory exceptions. Reinstall memory at
location <

location

PCI1302

Message

A bus time-out was detected on a component at bus <

bus

device<

device

> function <

func

Details

System performance may be degraded. The device has failed to
respond to a transaction.

Action

Cycle input power, update component drivers, if device is removable,
reinstall the device.

PCI1304

Message

An I/O channel check error was detected.

LCD Message

I/O channel check error detected. Power cycle system.

Action

Cycle input power, update component drivers, if device is removable,
reinstall the device.

PCI1308

Message

A PCI parity error was detected on a component at bus
<

bus

>device<

device

>function <

func

LCD Message

PCI parity error on bus <

bus

> device <

device

> function <

func

Power cycle system.

Details

System performance may be degraded, PCI device may fail to
operate, or system may fail to operate.

132

Содержание PowerEdge R820
















































































































































Результаты поиска

Содержание PowerEdge R820

Отзывы:

Похожие инструкции для PowerEdge R820

Бренды по названию

Популярные бренды

Dell PowerEdge R820, Руководство пользователя

Результаты поиска

Содержание PowerEdge R820

Отзывы:

Похожие инструкции для PowerEdge R820

Бренды по названию

Популярные бренды